Plant Data
Dam:
- Type: ravity concrete dam with rock cover on air suface; limited scoring possible
- Crest length: 47,0 m
- Height: 7,20 m and 6.0 m at spillway section
- Spillway length: 6,00 m
- Foundation depth: 2,00 m
- Crest width: 1,60 m
- Foundation width: 4,60 m
- Stilling basin length: 7,40 m
- Scoure gate: 1,50 x 1,50 m (wxh), invert level 2,0 m below spillway crest
Reservoir:
- Length: 120 m
- Width: 40 m
- Depth: 2,5 m after scouring
Intake building
- Dip board: wooden plan
- Rack: fine screen 1,65 x 2,68 cm (w x h), 60° inclined
- Rack cleaner: mechanical cleaner, manual or time based operation
Power Conduit:
- Type: conventionally excavated tunnel
- Profile: inverted U-shapeHeight: 140 cm
- Bottom width: 90 cm
- Inclination: hydraulic minimum
- Lining: partly concrete, partly cement plaster
- Length: 194 m
Surge Tank:
- Type: vertical shaft
- Cross section: square
Penstock:
- Type: steel pipe
- Length: 181 m
- Dimension: 740/11,4 mm
- Bifurcation: 740/11,4 to 2 x 530/8 mm
Generation Set 1:
- Type: Francis spiral turbine
- Manufacturer: Weipert & Söhne, Stockerau
- Year: 1923, refurbished in 1949 and 2001
- Nominal Power: 100 kW at 53.5 m head and at 200 l/s flow
Generation Set 2:
- Type: Francis spiral turbine
- Manufacturer: CKD Turbo Technics, Brno, Czech Republic
- Year: 2002
- Nominal Power: 200 kW at 53.5 m head and 400 l/s flow
Controls:
- Type: Simatic 7 PLC
Plant Capacity:
- Gross Head: 53,5 m
- Design Flow: 600 l/s
- Nominal Capacity: 300 kW
- Annual Production: 1.200.000 kWh
- Full Load Operation: 4.140 hours per year
Tailwater Conduit:
- Cross Section: trapezoidal channel, partly piped
- Length: 300 m